14
- When turning off the main switch (see Figure 2.2) secure it with a lock in order to
prevent unforeseen switching on or off by other persons.
- Supplementary installations such as labelling equipment, filling machines, printing
equipment etc. usually have their own power supply. This should be turned on and off
separately during maintenance work according to the manuals applicable to the
equipment.
- The cables connecting the control cabinet and the external equipment should be so
arranged that nobody can trip over them.
- Observe the safety guidelines contained in the manuals for the supplementary
equipment.
- Keep your body parts well away from rotating components such as the blades and
film unwind units.
- Do not wear loose clothing.
- Do not wear chains.
- Do not have your hair long and loose.
- Never interfere with a machine while it is running.
- During operation of and maintenance to the machine be careful of projecting parts so
that you do not bump against them.
To Next Page
Loading...