Repak RE20 - Page 4

4
4
Declaration of Agreement
According to appendix II, part A of the Machinery Directive 2006/42/EG
Repak BV
Phileas Foggstraat 18,
7821 AK Emmen
Netherlands
Telephone +31(0)591-668010
Hereby declares, completely under its own responsibility, in relation to the following machine:
Horizontal shaping, filling and sealing machine, Repak RE20, RE2080791
- That it meets the applicable essential requirements of the Machinery Directive (2006/42/EG)
- That, in addition to the abovementioned Directive, the machine meets the conditions in the following Directive (s):
EMC Directive (2004/108/EG)
Authorised author(s) of the technical dossier:
Repak BV
Phileas Foggstraat 18,
7821 AK Emmen
Netherlands
The following European harmonised standards, or other normative documents, are applied:
- Basis terms, general design principles: Basic terms for design,
risk evaluation and risk reduction, NEN-EN-ISO 12100:2010
- Minimum distances. To prevent the entrapment of parts of the
human body, NEN-EN 349:1994+A1:2008.
- Safety of packaging machines.
Section 3: Shaping, filling and sealing machines, NEN-EN 415-
3:1999+A1:2009.
- Safety of machines. Safety distances to prevent the upper or lower
parts of the human body from entering dangerous zones, NEN-EN-
ISO 13857:2008.
- Machine safety. Emergency stop facilities, functional aspects,
design principles NEN-EN-ISO 13850:2008.
- Human body dimensions.
Part 1: principles for the determination of the required dimensions of
access openings in machines for the entire body, NEN-EN 547-
1:1997+A1:2008.
Part 2: principles for the determination of the required dimensions of
access openings, NEN-EN 547-2:1997+A1:2008.
Part 3: anthropomorphic data, NEN-EN 547-3:1997+A1:2008.
- Ergonomic design principles.
Part 1: terminology and general principles, NEN-EN 614-1:
2006+A1:2009.
Part 2: interaction between the design of machines and work tasks,
NEN-EN 614-2:2000+A1:2008.
- Safety of machines. General requirements for the design and the
protection of screens (fixed and movable), NEN-EN 953:
1998+A1:2009.
- Safety of machines. Parts of control systems with a safety function
- Part 1: general design principles NEN-EN 954-1:1997.
- Safety of machines. Parts of control systems with a safety
function. Part 1: general design principles, NEN-EN-ISO 13849-
1:2006.
- Safety requirements for hydraulic and pneumatic systems and
parts. Pneumatics, NEN-EN 983:1997+A1:2008.
- Safety of machines. De-activation of the power supply and removal
of power. Prevention of unintended starting, NEN-EN
1037:1996+A1:2008.
- Safety of machines. Blocking with or without blocking facilities.
General basic principles for the design, NEN-EN 1088:
1996+A2:2008.
- Conveyor belts for general use. Requirements for the electrical
safety and flammability, NEN-EN EN 12882:2008.
- Electromagnetic compatibility (EMC). General standards. Part 6-
2: Immunity for industrial environments, NEN-EN-IEC 61000-6-
2:2001.
Part 6-3: Emissions standard for household, trade and light
industrial environments, NEN-EN-IEC 61000-6-3: 2001.
- Safety of machines. Instructions, brands and operating principles.
Part 1: requirements for visible, audible and tangible signals; NEN-
EN 61310-1:2008.
- Contact-free electrical safety features. NEN-EN-IEC 61496-
1:2004.
- Points of departure for the coding of instruction features and
operating organs. NEN-EN 60073: 2002.
- Safety of machines – electrical equipment of machines.
Part 1: General requirements: NEN-EN-IEC 60204-1: 2006.
- Human-machine interface (MMI) – operating principles.
NEN-EN 60447: 2004
- Low-Voltage switching and distribution equipment.
Part 1: General requirement - NEN-EN-IEC 61439-1:2009.
Part 2: Voltage switching and distribution equipment.
NEN-EN-IEC 61439-2:2009.
Netherlands, Emmen, 20-02-2020
Name and function R. Scholte, General Manager
Signature