Synchronous Motors MKD Application Instructions 13-15
DOK-MOTOR*-MKD*******-PR07-EN-P Version7.0 19.05.2004
13.8 Acceptances, Approvals
CE mark
Declarations of conformity certifying the structure of and the compliance
with the applicable EN standards and EC guidelines are available for all
MKD motors. If necessary, these declarations of conformity can be
demanded from the pertinent sales office.
The CE mark is applied to the motor type label of the MKD motors.
CEf1.fh7
Fig. 13-21: CE mark
UR, cUR Listing
The MKD motors listed below have been presented to the UL authorities
“Underwriters Laboratories Inc.®”.
• MKD041A, -B
• MKD071A, -B
• MKD090B
• MKD112A, -B, -C, -D
The motors have been approved by the UL authorities under the file
number E163211 and have been marked on their motor type label with
the following sign:
R
cURus.fh7
Fig. 13-22: cUR mark
Note: When printing this document the certification for the MKD025
motors is still not completed.
Declaration of conformity
To Next Page
Loading...
Need help?
General
