2-2 Important Instructions on Use Synchronous Motors MKD
19.05.2004 Version7.0 DOK-MOTOR*-MKD*******-PR07-EN-P
Fields of Use and Application
AC servo motors of the MKD series by Rexroth are intended to be used
as servo and main drive motors. The following are typical fields of
application:
• Machine tools
• Printing and paper-processing machines
• Packaging and food-processing machines
• Automation and handling
Unit types with different driving powers and different interfaces are
available for an application-specific use of the motors.
Controlling and monitoring of the motors may require connection of
additional sensors and actuators.
Note: The motors may only be used with the accessories specified
in the documentation. Components which are not expressly
named may neither be mounted nor connected. The same
applies to cables and lines.
The motors may be operated only in the expressly specified
component configurations and combinations and with the
software and firmware specified in the appropriate functional
description.
Any connected drive controller must be programmed before startup, in
order to ensure that the motor executes the functions specific to the
particular application.
The motors may only be operated under the assembly, mounting and
installation conditions, in the position of use, and under the
environmental conditions (temperature, degree of protection, humidity,
EMC, and the like) specified in this documentation.
2.2 Non-Intended Use
Any use of the motors outside of the fields of application mentioned
above or under operating conditions and technical data other than those
specified in this documentation is considered to be “non-intended use”.
MKD motors may not be used if ...
• they are subjected to operating conditions which do not comply with
the environmental conditions described above (e.g. operation under
water, under extreme variations in temperature or extreme maximum
temperatures is not permitted),
• the intended fields of application have not been expressly released
for the motors by Rexroth. Please be absolutely sure to also observe
the statements made in the general safety instructions.
To Next Page
Loading...
Need help?
General
