© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
Approaches for upgrade guideline:
1) Website
https://rgblink-web.azurewebsites.net/productsinfo.aspx?id=269
2) Dropbox
https://www.dropbox.com/scl/fo/07xkx4n6fcixm816v2yxq/h?rlkey=9qtaewha08wb2n1wqhbue63
mn&dl=0
Steps:
1.Copy upgrade package to root directory of USB disk.
2. Power on the device and connect USB disk to USB-C port labeled number 1 by an OTG cable.
3. Push MENU Button to enter MENU. Rotate ENTER knob to move the cursor to【SETTING】, press
knob once again and select【About】.
Warning：
1. mini-mx only supports some models of hard disks. It is recommended to upgrade mini-mx with U disk in FAT32
format. U disk supports USB 2.0 and USB 3.0. Partitioned USB disk not supported.
2. Do not power off during the upgrade process, otherwise mini-edge may be unable to enter the system after
booting.
To Next Page
Loading...
Need help?
General