© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
4. Select【Model Version】to check current system version and upgrade file version imported via
USB disk. Rotate ENTER knob to move the cursor to【Upgrade files】, press knob once again to
enter streaming configuration interface, choose【Upgrade】to upgrade mini-edge.
5. Use ENTER knob to choose Ugrade file and then Upgrade.
6. The upgrade interface is shown in the figure below. Please DO NOT power off the device during
upgrade. mini-edge will reboot after upgrade is completed.
To Next Page
Loading...
