Richard Wolf 2303 - Device Fuses; Disposal of the Product, Packing Material and Accessories

50
GA--A 202
8.9 Device fuses
CAUTION!
The specification of the fuses in the device must correspond with
the fuse ratings on the identification plate.
Use only the fuses specified in the spare parts list.
L Power input connector with fuse holder
1
2
2
3
3
4
Z Switch off the device and disconnect the power cable from the wall
socket and from the power input connector of the device.
Z Push together the clamps [2] of the fuse holder [1] and pull out the fuse
holder.
Z Pull out and replace fuses [3].
Z Reinsert fuse holder [4] and push it in until it snaps into place.
8.9.1 Disposal of the product, packing material and accessories
For the disposal observe the relevant regulations and laws valid in your
country.
' For further information please contact the manufacturer.