17. Open SP Data Output P-1 (Toner Density).
18. Check that V
T
has the same values as Vref for all colors (Bk, Y, M, C). If
not, touch the Index key [B] then return to the test mode page 3 to
perform the developer initial setting (step 15) again.
19. Put the toner tank [A] on the Accuride rails (2 screws).
20. Close the front doors and install the copy tray.
21. Place a C-4 test chart on the exposure glass.
22. Touch the Copy In SP key [C] and make 20 full color copies using A3 or
11" x 17" size paper. (40 full color copies using A4 or 11" x 8
1/2
" is also
acceptable.)
[B]
[C]
Replacement
and
Adjustment
SM 5-17 A172/A199
To Next Page
Loading...
