Specify the network interface board setting (using the Web browser or telnet).
To specify the network interface board setting, use the Web browser or telnet. This section explains
how to specify the network interface board setting using the Web browser.
• For details about specifying the printer setting, see p.147 "Specifying System Settings using the
Control Panel (System Menu)".
•
For details about specifying the network interface board setting, see p.116 "Changing the Printer
Settings".
Specifying Notification the Printer Status by E-mail
In E-mail, you can specify the basic and authentication settings for sending e-mails.
Specifying SMTP Server
You can specify whether to use SMTP, and specify the SMTP server name and SMTP port number.
The
“Administrator E-mail Address” will appear in the e-mail message. The “Device E-mail Address”
will appear in the “From” box.
Functions Selectable value Default
SMTP Active
Inactive
Inactive
SMTP Server Name 127 characters max. (1-byte
alphanumerics)
None
SMTP Port Number 1-65535 25
Device E-mail Address 127 characters max. (1-byte
alphanumerics)
None
Administrator E-mail Address 127 characters max. (1-byte
alphanumerics)
None
Text in E-mail 255 characters max. (1-byte
alphanumerics) (2-byte
characters available)
None
Specifying SMTP Authentication
By
specifying the SMTP authentication setting, you can send e-mails to destinations where the e-mail
server carries out SMTP authentication.
4. Monitoring and Configuring the Printer
118
To Next Page
Loading...
