Ricoh Aficio GX7000 - No Paper;Tray Not Detected (Bypass Tray)

1. Press the [Job Reset] key.
BAG055S
2. Press the [#Enter] key.
BAG056S
3. Press the [#Enter] key.
No Paper/Tray Not Detected (Bypass Tray)
There is no paper in the bypass tray or the paper is not loaded properly. Do one of the following:
•
Loading paper (Press the [#Enter] key).
• Cancel the print job.
• see p.28 "Detaching and Reattaching the Multi Bypass Tray".
Loading Paper
Load paper in the bypass tray, and then press the [#Enter] key to begin printing.
1. Load paper in the bypass tray.
6. Troubleshooting
216
6