. 0. 0. 0
To get an IP address for the printer, contact your network administrator.
The value moves by 10 if the [ ] or [ ] key is kept pressed.
When the [#Enter] key is pressed, the cursor moves to the next field.
7. Press the [#Enter] key.
As the specified value is entered in each field, the cursor moves to the next field.
IP Address:
192. . 0. 0
8. Repeating the steps, specify values in all fields, and then press the [#Enter] key.
To return to the previous field, press the [Escape] key.
9. Specify “Subnet Mask” and “Gateway Address” in the same way as when specifying the
IP address.
10. After you have made all the settings, press the [Online] key.
The specified settings are set and the initial printer screen reappears.
You can print the configuration page to confirm the specified settings.
• For details about how to print a configuration page, see p.55 "Printing a Configuration Page".
Quick Install for Network
Follow the procedure below to install the printer driver, User Guide, and DeskTopBinder -
SmartDeviceMonitor for Client.
• If the version of SmartDeviceMonitor for Client already installed in the computer is newer than that
on the CD-ROM, you cannot use “Quick Install” to install the printer driver. Install the printer driver,
and then create the port.
•
To install under Windows 2000/XP/Vista, Windows Server 2003 or WindowsNT4.0, you must
have an account that has Manage Printers permission. Log on as an Administrator.
Notes on the Installation (Network Connection)
If the message “Digital Signature Not Found” or the [Software Installation], [Hardware Installation]
or [Windows can't verify the publisher of this driver software] dialog box appears:
1. Click [Yes], [Continue Anyway] or [Install this driver software anyway] to continue the installation.
1. Start Windows, and insert the provided CD-ROM into the CD-ROM drive.
Quit all other applications currently running.
2. Preparing for Printing
64
To Next Page
Loading...
