Ricoh Aficio GX7000 - Attaching the Multi Bypass Tray by

5. Fully insert the duplex unit.
Paper jams can occur if the unit is not properly connected. Be sure to push the unit firmly into position.
BAJ005S
• Dispose of the removed component as general plastic waste or hand it in for collection.
Attaching the Multi Bypass Tray BY1010
1. Make sure the printer's power cord is unplugged.
2. Take the multi bypass tray out of its box.
3. Remove the orange tape from the multi bypass tray.
4. Fully insert the multi bypass tray.
BAH304S
5. When using the multi bypass tray, pull out its extension and adjust the side guides according
to the size of the loaded paper.
After attaching the paper feed unit, you must register where to start printing on paper loaded in the paper
feed unit.
• For details about registering where to start printing on paper loaded in the paper feed unit, see
p.142 "Registration".
Setting Up the Hardware
39
2