Ricoh Aficio GX7000 User Manual

Quick Install for USB
The CD-ROM may not be inserted properly. Check that the CD-ROM is inserted properly.
Check also that it is not damaged and the CD-ROM
drive is working properly.
The power cord or USB cable may not be properly
connected.
Check that the power cord and USB cable are
properly connected and not damaged.
The operating system is incompatible.
There is insufficient hard disk space.
Check that the computer's operating system is fully
compatible with this printer. See p.31 "Checking
the Computer and Installation Area".
Other applications are not closed. When installing software, quit all other
applications. Installation may be disrupted if other
applications are open. Also, quit any anti-virus
applications that are running.
Windows made USB settings automatically. Open Windows' Device Manager, and then,
under [Universal Serial Bus controllers], remove
any
conflicting devices. Conflicting devices have a
yellow [!] or [?] icon by them. Take care not to
accidentally remove required devices. For details,
see p.172 "Deleting Devices".
The printer is turned on before installation. Switch the printer off and then on, and then try
Quick Install for USB again.
Windows NT 4.0 is running. • Windows NT 4.0 do not support USB
connection with the printer. Connect the
printer via a network in this case.
•
[Quick Install for USB] is unavailable. See
p.69 "Installing the Printer Driver (USB)".
• Configure the printer as a shared network
printer. See p.78 "Installing the Printer Driver
(Network)".
• For details about network printer settings, see
p.71 "Sharing the Printer".
The USB connection does not work. Switch the printer off, unplug the USB cable from
the printer, launch “Quick Install for USB” again,
and
then switch the printer on when the dialog box
confirming printer driver installation appears. If this
does not solve the problem, press the [Menu] key
on the control panel, change “USB Setting” in [Host
6. Troubleshooting
166
6

Ricoh Aficio GX7000 Specifications

Power

power source	100 – 120V, 50/60Hz
power consumption	35W or less
energy saver mode	5W or less

Printing Specifications

resolution	True 1200 x 1200 dpi, 600 x 600 dpi, 600 x 300 dpi (Maximum 3600 x 1200 dpi equivalent)
printing speed	29 pages-per-minute in B&W and full-color
first print speed	B&W: 6.5 seconds or less, Color: 9 seconds or less

Paper Handling

paper capacity	250-Sheet Standard Paper Tray, 100-Sheet Multi-Bypass Tray, 250-Sheet Paper Feed Unit
maximum paper capacity	600 sheets
output capacity	100 sheets (face up)

Weight and Dimensions

dimensions	21.4" x 21.9" x 10.4" / 545 x 558 x 269 mm
weight	42.1 lbs. / 19.1 kg