Ricoh Aficio MP C2550 Service Manual

Fax Option (D433) Installation
D432/D433 8 SM
4. Install the FCU [A] ( x 2; removed in step 3).
5. Write the serial number of the fax unit on the serial number decal, and then attach this
decal to the bracket [B] of the fax unit.
6. Connect the telephone cord to the "LINE" jack.
7. Only for NA models, install the TEL cap in the "TEL" jack if the handset will not be
installed.
8. Slide the dummy cover [A] to the left side with a flat-head screwdriver, and then
remove it (hooks).
9. Put the fax operation panel [A] on the left edge of the copier's operation panel, and
then slide it to the right side.
10. Attach the fax function decal at the location [B].
11. Attach an appropriate fax operation decal at the location [C].

Ricoh Aficio MP C2550 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Color)	25 ppm
Print Speed (Monochrome)	25 ppm
Print Resolution	600 x 600 dpi
Maximum Print Resolution	2400 x 600 dpi
Duplex Printing	Yes
Copy Speed (Color)	25 cpm
Copy Speed (Monochrome)	25 cpm
Copy Resolution	600 x 600 dpi
Memory (Maximum)	1 GB
Hard Disk Drive (Optional)	80 GB
Interface	USB 2.0, Ethernet 10/100Base-TX
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Scan Resolution	600 dpi
Zoom Range	25% - 400%
Paper Size	A4, A5, B5
Paper Weight	52 - 256 g/m²
PDL	PCL 6, PostScript 3
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac OS