Ricoh Aficio MP C2550 Service Manual

Copier Installation
SM 2-15 D037/D038/D040/D041
Installaion
 1) Print the ACC test pattern (User tools > Maintenance > ACC > Start).
 2) Put the printout on the exposure glass.
 3) Put 10 sheets of white paper on top of the test chart.
 4) Close the ARDF or the platen cover.
 5) Press “Start Scanning” on the LCD panel. The machine starts the ACC.
6. Check that the sample image has been copied normally.
7. Open the front cover.
8. Remove the instruction guide sheet [A], and make sure the SMC report [B] is stored as
shown above. Then replace the instruction guide sheet.
Settings Relevant to the Service Contract
Change the necessary settings for the following SP modes if the customer has made a
service contract.
 You must select one of the counter methods (developments/prints) in accordance
with the contract (SP5045-001).
Counting method
SP No. Function Default
SP5-045-001
Specifies if the counting method used in
meter charge mode is based on
developments or prints. NOTE: You can set
this one time only. You cannot change the
setting after you have set it for the first time.
“0”: Developments
A3/11" x 17" double counting
SP No. Function Default

Ricoh Aficio MP C2550 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Color)	25 ppm
Print Speed (Monochrome)	25 ppm
Print Resolution	600 x 600 dpi
Maximum Print Resolution	2400 x 600 dpi
Duplex Printing	Yes
Copy Speed (Color)	25 cpm
Copy Speed (Monochrome)	25 cpm
Copy Resolution	600 x 600 dpi
Memory (Maximum)	1 GB
Hard Disk Drive (Optional)	80 GB
Interface	USB 2.0, Ethernet 10/100Base-TX
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Scan Resolution	600 dpi
Zoom Range	25% - 400%
Paper Size	A4, A5, B5
Paper Weight	52 - 256 g/m²
PDL	PCL 6, PostScript 3
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac OS