EasyManuals Logo

Ricoh Aficio MP C2550 Service Manual

Ricoh Aficio MP C2550
1171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #315 background imageLoading...
Page #315 background image
Service Program Mode
SM 5-3 D037/D038/D040/D041
System
Maintenance
Reference
Switching Between SP Mode and Copy Mode for Test Printing
1. In the SP mode, select the test print. Then press "Copy Window".
2. Use the copy window (copier mode), to select the appropriate settings (paper size,
etc.) for the test print.
3. Press Start C to start the test print.
4. Press SP Mode (highlighted) to return to the SP mode screen and repeat from step 1.
Selecting the Program Number
Program numbers have two or three levels.
1. Refer to the Service Tables to find the SP that you want to adjust before you begin.
2. Press the Group number on the left side SP Mode window that contains the SP that
you want to adjust.
3. Use the scrolling buttons in the center of the SP mode window to show the SP number
that you want to open. Then press that number to expand the list.
4. Use the center touch-panel buttons to scroll to the number and title of the item that you
want to set and press it. The small entry box on the right activates and shows the
below default or the current settings.
Refer to the SP Tables for the range of allowed settings.
1. Do this procedure to enter a setting:
Press to toggle between plus and minus and use the keypad to enter the
appropriate number. The number you enter writes over the previous setting.
Press to enter the setting. (The value is not registered if you enter a number
that is out of range.)
Press “Yes” when you are prompted to complete the selection.

Table of Contents

Other manuals for Ricoh Aficio MP C2550

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C2550 and is the answer not in the manual?

Ricoh Aficio MP C2550 Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan, Fax
Print Speed (Color)25 ppm
Print Speed (Monochrome)25 ppm
Print Resolution600 x 600 dpi
Maximum Print Resolution2400 x 600 dpi
Duplex PrintingYes
Copy Speed (Color)25 cpm
Copy Speed (Monochrome)25 cpm
Copy Resolution600 x 600 dpi
Memory (Maximum)1 GB
Hard Disk Drive (Optional)80 GB
InterfaceUSB 2.0, Ethernet 10/100Base-TX
Fax Transmission Speed33.6 Kbps
Maximum Paper SizeA3
Scan Resolution600 dpi
Zoom Range25% - 400%
Paper SizeA4, A5, B5
Paper Weight52 - 256 g/m²
PDLPCL 6, PostScript 3
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac OS

Related product manuals