Loading Paper
103
5
D Select the paper type using {T} or {U}, and then press the {OK} key.
E Press the {Menu} key to return to the initial screen.
Note
❒ If the printing result is wet or smudged with the [Plain Paper] setting, Make
the following settings using the control panel:
•Select [Plain Paper] for the paper type according to the procedure above.
•Press the {Menu} key, select [Maintenance], then select [General Settings],
and then select [Plain Paper 1] or [Plain Paper 2] for the bypass tray's paper
type.
❒ The following paper types cannot be printed on both sides:
• Special Paper, Labels (adhesive label paper), Cardstock, OHP (transpar-
ency), Thick Paper 2 (157 - 209.4 g/m
2
), Thin Paper, Plain:Dup.Back (re-
verse side of plain paper), Thick1:Dup.Back (reverse side of thick
paper), Thick2:Dup.Back
To Next Page
Loading...
