Replacing Consumables and Maintenance Kit
132
6
Replacing the Dustproof Filter
The dustproof filter is attached to the left side of the printer, as shown.
A Turn off the power, and then unplug the power cable.
B Use the grips on both sides to turn and then remove the dustproof filter cover.
Place the removed dustproof filter cover down on a stable and level surface.
C Carefully remove the dustproof filters attached to the filter's cover.
Handle removed dustproof filters with care. If you shake them, dust might
scatter.
AQC019S
AET158S
AET159S
To Next Page
Loading...
