Cleaning the Registration Roller
141
7
Cleaning the Registration Roller
CAUTION:
Clean the registration roller if dots (caused by specks of paper stuck to the roller)
appear on printed OHP transparencies.
A Turn off the power, and then unplug the power cable.
B Carefully open the printer's front cover (A) of by pulling left and right side
levers.
C Set the registration roller as shown.
• The inside of this printer becomes very hot. Do not touch parts labelled “v”
(indicating a hot surface). Touching these parts will result in burns.
AQC018S
AQC171S
To Next Page
Loading...
