Ricoh AficioSP C410DN - 2 Installing Options; Available Options; Option List

9
2. Installing Options
Available Options
This section describes how to install options.
By installing options, you can improve the printer performance and have an ex-
panded variety of features to use. For the specifications of each option, see p.182
“Specifications”.
R
CAUTION:
Important
❒ The voltage rating of the connector for options is 24 V DC or less.
Option List
The following is a list of options for this printer.
• Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
• Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
The 25 ppm model printer The 30 ppm model printer
Paper Feed Unit Type 4000 Available Available
Hard Disk Drive Type 4000 Available Available
Memory Unit Type D 128MB Available Available
Memory Unit Type E 256MB Available Available
IEEE 802.11b Interface Unit Available Available
IEEE 1284 Interface Board Type A Available Available
Bluetooth Interface Unit Type 3245 Available Available
User Account Enhance Unit Type E Available Available
USB Host Interface Board Type A Available Available
Gigabit Ethernet Board Type A Available Available
Camera Direct Print Card Type B Available Available
Data Overwrite Security Unit Type E Available Available
VM Card Type D Available Available
Data Storage Card Type A Available Available