Ricoh AficioSP C410DN - IEEE 802.11 B (Wireless LAN) Configuration

IEEE 802.11b (Wireless LAN) Configuration
71
4
IEEE 802.11b (Wireless LAN) Configuration
Configure the printer to use IEEE 802.11b (Wireless LAN). The following table
shows the control panel settings and their default values. These items appear in
the [Host Interface] menu.
Note
❒ To use IEEE 802.11b (Wireless LAN), select [IEEE 802.11b] for [LAN Type] in [Net-
work] in the [Host Interface] menu, and then set the IP Address, Subnet Mask,
Gateway Address, DHCP, Network Frame Type, and Effective Protocol un-
der [Network]. For details about setting items under “Configuring the Printer
for the Network”, see Software Guide.
❒ The 802.11b interface unit cannot be used simultaneously with a standard
ethernet interface.
A Press the {Menu} key.
B Select [Host Interface] using {T} or {U}, and then press the {OK} key.
Setting Name Default Value
Communication Mode 802.11 Ad hoc
Channel • Inch version
(1-11) 11
•Metric version
(1-13) 13
Communication Speed Auto
SSID blank
WEP Off
AQC001S
YMCK