Connecting the Printer
58
3
USB Connection
Important
❒ USB2.0 interface cable is not supplied. Obtain it separately, according to the
computer you are using.
❒ USB connection is possible under Windows 98 SE/Me/2000/XP, Windows
Server 2003, Mac OS 9.x, and Mac OS X.
❒ Windows 98SE/Me supports USB1.1 speeds.
❒ USB connection with Macintosh is only possible via the printer's USB port.
A Connect the square-shaped connector of the USB2.0 cable to the USB port.
B If the gigabit ethernet board is attached, connect the square-shaped connec-
tor of the USB2.0 cable to the USB port of the board.
The printer's ethernet and USB ports are not available when the gigabit eth-
ernet board is attached to the printer.
C Connect the opposite end's flat connector to devices such as your compu-
ter's USB interface, or a USB hub.
Reference
For details about attaching the gigabit ethernet board, see p.43 “Attaching
Gigabit Ethernet Board Type A”.
For details about settings for USB connection printing, see Software Guide.
AET124S
AQC055S
To Next Page
Loading...
