Ricoh AficioSP C410DN - Adjusting Tray Registration

Adjusting the Printer
152
8
Adjusting Tray Registration
You can adjust the registration of each tray. The vertical adjustment is used for
all trays. Normally, you need not update the registration. But when the optional
paper feed unit or the duplex unit is installed, updating is useful in some cases.
A Press the {Menu} key.
B Select [Maintenance] using {T} or {U}, and then press the {OK} key.
C Select [Quality Maintenance] using {T} or {U}, and then press the {OK} key.
D Select [Registration] using {T} or {U}, and then press the {OK} key.
E Select [Print Test Sheet] using {T} or {U}, and then press the {OK} key.
AQC001S
YMCK