155
9. Troubleshooting
Error & Status Messages on the Control
Panel
This section explains what the messages that appear on the control panel mean
and what to do when a particular message appears.
❖ Status Messages (in alphabetical order)
Message Status
Calibrating... The printer is calibrating the color. Wait a while.
Energy Saver The printer is in the Energy Saver mode. Press
any keys to recover to the normal mode.
Hex Dump Mode In the Hex Dump mode, the printer receives
data in hexadecimal format. Turn off the print-
er after printing, and then turn back on.
Job Suspended All jobs are suspended. Turn off the printer,
and turn it on again to recover.
Loading toner The printer is loading toner. Wait a while.
Offline The printer is offline. To start printing, switch
the printer online by pressing the Online Key.
Please wait. This message may appear for a few seconds. It
means the printer is initializing, replenishing
toner, or executing maintenance operations.
Wait a while.
Printing... The printer is printing. Wait a while.
Ready This is the default ready message. The printer
is ready for use. No action is required.
Resetting Job... The printer is resetting jobs. Wait a while.
Setting change... The printer is setting changing. Wait a while.
Waiting... The printer is waiting for the next data to print.
Wait a while.
To Next Page
Loading...
