Ricoh AficioSP C410DN - Set the Gradation Correction Value

Adjusting the Printer
146
8
Set the Gradation Correction Value
During printing, you can correct the gradation in two areas: bright part (high-
light) and the medium (middle). The correction value for the highlight and the
medium parts are set using [Print Sheet 1] and [Print Sheet 2] respectively.
A Press the {Menu} key.
B Select [Maintenance] using {T} or {U}, and then press the {OK} key.
C Select [Quality Maintenance] using {T} or {U}, and then press the {OK} key.
D Select [Colour Calibration] using {T} or {U}, and then press the {OK} key.
AQC001S
YMCK