Adjusting the Printer
150
8
❖ Relationship between gradation correction sheet and display
The printed gradation correction sheet and display correspond as shown in
the following diagram:
Comparing at the gradation correction sheet and correction value of each
color, K (black), M (magenta), and C (cyan)/Y (yellow), determine the grada-
tion correction and make settings using the control panel.
Note
❒ XXXX represents the printer model name.
A K (black) correction values
Adjust the printed color when only black toner is used. The currently set
correction value is printed in red.
B M (magenta) correction values
Adjust the printed color when only magenta toner is used. The currently
set correction value is printed in red.
C C (cyan)/Y (yellow) correction values
Correct the color printed when cyan and yellow are used. For C/Y (cy-
an/yellow), the correction value is determined based on a combination of
these two colors, although settings are made for separately each color.
D K, M, C/Y
The numerical value set at time of gradation correction sheet printing is
displayed. This corresponds to the numerical value set using the operation
panel.
AQC1000S
To Next Page
Loading...
