Installing Options
26
2
Note
❒ After finishing installation, you can check User Account Enhance Unit is
properly installed: Print the configuration page from the [List/Test Print]
menu. If it is installed properly, “Accounting Module” will appear for “De-
vice Connection” on the configuration page.
❒ If the User Account Enhance Unit is not installed properly, reinstall it fol-
lowing this procedure. If you cannot install it properly even after attempt-
ing reinstallation, contact your sales or service representative.
Reference
For printing the configuration page, see “Test Printing”, Quick Installation
Guide.
Install the controller board carefully. For details, see p.13 “Caution when
re-installing the controller board”.
To Next Page
Loading...
