Connecting the Printer
56
3
C If the gigabit ethernet board is attached, connect the ethernet cable to the
board.
The printer's ethernet and USB ports are not available when the gigabit eth-
ernet board is attached to the printer.
D Connect the other end of the cable to the printer's network, such as a hub.
Note
❒ The printer's ethernet and USB ports are not available when the gigabit
ethernet board is attached to the printer.
Reference
For details about network environment settings, see Software Guide.
For details about attaching the gigabit ethernet board, see p.43 “Attaching
Gigabit Ethernet Board Type A”.
AQC056S
To Next Page
Loading...
