1: On
3 Not used Do not change these settings.
4
Line resolution of e-mail
attachment: 400 x 400
0: Off
1: On
Sets the line resolution of the e-mail attachment as 400 x 400.
5-6 Not used Do not change these settings.
7
Designates the bits to
reference for original size of
e-mail attachments
0: Registered (Bit 0 to 6)
1: No registration.
The "0" selection (default) references the settings for Bits 00,
01, 02, 04 above. The "1" selection ignores the selections of
Bits 00, 01, 02, 04.
Switch 03 - Not used (do not change the settings)
Switch 04
No FUNCTION COMMENTS
0
Full mode address selection
0: Full mode address
1: No full mode (simple mode)
If the other ends have the addresses, which have the full mode
function flag ("0"), this machine determines them as full mode
standard machines.
• This machine attaches the "demand of reception
confirmation" to a message when transmitting.
• This machine updates the reception capability to the
address book when receiving.
1-7 Not used Do not change these settings.
Switch 05
No FUNCTION COMMENTS
0
Directr transmission selection
to SMTP server
0: ON
1: OFF
Allows or does not allow the direct transmission to SMTP
server.
Dedicated Transmission Parameters
113