System Switch 0A [SP N0. 1-101-011]
No Function Comments
0-3 Not used Do not change these settings.
4 Dialing on the ten-key pad when the
external telephone is off-hook
0: Disabled 1: Enabled
0: Prevents dialing from the ten-key pad while the external
telephone is off-hook. Use this setting when the external
telephone is not by the machine, or if a wireless telephone
is connected as an external telephone.
1: The user can dial on the machine’s ten-key pad when
the handset is off-hook.
5 On hook dial
0: Disabled 1: Enabled
0: On hook dial is disabled.
6-7 Not used Do not change the factory settings
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
System Switch 0E [SP No. 1-101-015]
No FUNCTION COMMENTS
0-1 Not used Do not change the settings.
2 Not used This machine does not have the capture function.
3
Action when the external handset
goes off-hook
0: Manual tx and rx operation
1: Memory tx and rx operation (the
display remains the same)
0: Manual tx and rx are possible while the external handset
is off-hook. However, memory tx is not possible.
1: The display stays in standby mode even when the
external handset is used, so that other people can use the
machine for memory tx operation.
Note that manual tx and rx are not possible with this setting.
4-7 Not used Do not change these settings.
System Switch 0F [SP No. 1-101-016]
No Function Comments
4. Service Tables
54