Ricoh C2000 User Manual

3
Hang up setting at DIS reception
disabled
0: No hang up
1: Hang up after transmitting DCN
Sets whether the machine disconnects after DIS
reception.
4
Number of times for training
0: 1 time, 1: 2 times
Selects the number of times training is done at the
same bit rate.
5
Space CSI transmission setting at no CSI
registration
0: Not transmitted,
1: Transmitted
When "0" is selected, frame data is enabled.
When "1" is selected, the transmitted data is all
spaces.
6-7 Not used Do not change these settings.
IP Fax Switch 08 [SP No. 1-111-009]
No. FUNCTION COMMENTS
0-1
T1 timer adjustment
Adjusts the T1 timer.
The default is "00" (35 seconds).
Bit 1: 0, Bit 0: 0 = 35 sec
Bit 1: 0, Bit 0: 1 = 40 sec
Bit 1: 1, Bit 0: 0 = 50 sec
Bit 1: 1, Bit 0: 1 = 60 sec
-
2-3
T4 timer adjustment
Adjust the T4 timer.
The default is "00" (3 seconds).
Bit 3: 0, Bit 2: 0 = 3 sec
Bit 3: 0, Bit 2: 1 = 3.5 sec
Bit 3: 1, Bit 2: 0 = 4 sec
Bit 3: 1, Bit 2: 1 = 5 sec
-
4-5
T0 timer adjustment
Bit 5: 0, Bit 4: 0 = 75 sec
Bit 5: 0, Bit 4: 1 = 120 sec
Adjusts the fail safe timer. This timer sets the interval
between "setup" data transmission and T.38 phase
decision. If your destination return is late on the
4. Service Tables
92
4

Ricoh C2000 Specifications

General

Category	Printer
Printing Technology	Laser
Print Speed (Black)	20 ppm
Print Speed (Color)	20 ppm
Duplex Printing	Yes
USB Connectivity	Yes