Message Cause Solution and reference
"Print overrun." A page image is
discarded while
printing the page.
Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
"Punch has been
cancelled."
The Punch function
was canceled
because the staple
position is specified
incorrectly.
Check the orientation of the paper and print data, and
the specified punch position.
See "Punching Holes on Printed Pages", User Guide
(Full Version).
"Receiving data
failed."
Transmission of
data was canceled.
Send the data again.
"Sending data
failed."
Transmission of
data from the
printer driver was
canceled.
Check that the computer is operating normally.
"Staple error
occurred. The job
has been
cancelled."
The number of
sheets that can be
stapled was
exceeded, and
printing was
canceled.
Check the number of sheets that can be stabled on the
finisher in use.
page 298 "List of Specifications"
9. Troubleshooting
266
To Next Page
Loading...
