Message Cause Solution and reference
"Staple has been
cancelled."
The Staple function
was canceled
because too many
printed sheets were
specified to be
stapled.
Check the specification of the finisher in use, and
specify the setting accordingly.
• Number of sheets that can be stapled together
page 298 "List of Specifications"
• Staple position that can be specified on different
paper orientation and print data orientation
See "Stapling Printed Pages", User Guide (Full
Version).
Incorrect finisher is
specified in the
printer driver.
Check the option configuration specified in the printer
driver.
See "The Option Configuration of the Machine Is Not
Reflected in the Printer Driver", User Guide (Full
Version).
A malfunction
occurred
temporarily on the
machine.
Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 11 "Turning On and Off the Power"
"The job was
cancelled because
the specified settings
are not applicable
for Booklet."
A condition in which
binding cannot be
performed was
specified, and
printing was
canceled.
Check the binding condition.
"The print job has
been cancelled
because capture
file(s) could not be
stored: Exceeded
max. memory."
The amount of
available space on
the hard disk
became low while
saving the capture
data.
• Reduce the size of the document to send.
• Erase documents that are no longer needed.
See "Deleting Documents Stored in the Machine"
and "Erasing Documents from Document Server",
User Guide (Full Version).
"The print job has
been cancelled
because capture
file(s) could not be
stored: Exceeded
max. number of
files."
The number of
documents stored in
the machine
exceeded the
maximum number
while saving the
capture data.
Erase documents that are no longer needed.
See "Erasing Documents from Document Server", User
Guide (Full Version).
When a Message Appears While Using the Printer Function
267
To Next Page
Loading...
