4. Rotate the paper size dial, which is located at the front right of the tray, so that the size
and the feed direction of the paper in the paper tray can be seen from the window.
5. Lifting the front side of the tray, insert it into the machine, and then push it in carefully until
it stops.
• While you are printing, a message informing you that the size of the paper that is loaded and the
print setting are different may appear. To change the paper size, select [Job Reset] and load the
correct size paper, and then try printing again. To not change the paper size, select [Loaded
Paper].
Loading Paper
177
To Next Page
Loading...
