7. Pull out the pieces of release paper that were folded outside, and then press the staple
unit cradle towards the machine.
Support the staple unit cradle with a hand so that it does not move when pulling out the release
paper. Do not press the staple unit forcibly. The release paper may tear. Pull the release paper to
the sides slowly.
After removing the release paper, press forcibly on the staple unit cradle to fasten it to the machine.
8. Insert the staple unit into the staple unit cradle.
Push the staple unit firmly into the back.
Installing the Offline Stapler
45
To Next Page
Loading...
