20 February, 2001 USING SERVICE PROGRAM MODES
5-15
Service
Tables
4
Mode Number/Name Function/[Setting]
Sharpness Adjustment
1 Edge Adjusts the clarity of line images and of solid-image
edges. Higher settings provide greater clarity.
[–2 ~ 2 / 0 / 1/step]
• This setting is applied to all image processing modes of
SP4-921.
• It is used for both MTF filtering and smoothing.
☛
6.5.4 IPU
2 Solid image Adjusts the clarity of solid image areas. Higher settings
provide greater clarity.
[–2 ~ 2 / 0 / 1/step]
This setting is only applied to Text 2 and Special 1 of SP4-
921.
☛
6.5.4 IPU
925*
3 Low ID line
Adjusts the clarity of lines with low image density. Higher
settings provide greater clarity.
[–2 ~ 2 / 0 / 1/step]
This setting is only applied to Text 1, Text 2, Photo 2,
Special 1, Special 2, and Special 5 of SP4-921.
☛
6.5.4 IPU
Texture Removal926*
Adjusts the texture removal level.
0: The default value for each mode is used. Text 1,
Special 2, and Special 5 have a default of 3 and Photo 1-3
have a default of 1.
1: No removal applied.
2 – 5: Removal applied at the level specified here. The
higher the setting (level), the less clear the image will
become (more texture removal).
[0 ~ 5 / 0 / 1/step]
This setting is only applied to Text 1, Photo 1–3, Special
2, and Special 5 of SP4-921.
☛
6.5.4 IPU
Line Width Correction927*
Adjusts the line width correction algorithm. Positive
settings produce thicker lines; negative settings produce
thinner lines.
[–2 ~ 2 / 0 / 1/step]
This setting is only applied to Text 1, Text 2, Photo 2,
Special 1, Special 2, and Special 5 of SP4-921.
☛
6.5.4 IPU
Independent Dot Erase928*
Selects the dot erase level. Higher settings provide
greater erasure.
[–2 ~ 2 / 0 / 1/step]
This setting is only applied to Text 1, Text 2, Photo 2,
Special 1, Special 2, and Special 5 of SP4-921.
☛
6.5.4 IPU
To Next Page
Loading...
