USING SERVICE PROGRAM MODES 20 February, 2001
5-16
4
Mode Number/Name Function/[Setting]
White Line Erase941*
Selects the white line erase level.
[0 ~ 5 / 2 / 1/step]
None Weak Strong
0 1 – 2 – 3 – 4 –5
• This setting is effective only Photo 1, Photo 3, Special 3
or Special 4 mode.
• 0: White line erase is not used, and white level
correction is used instead
• This setting is applied regardless of what mode has
been selected in SP4-921.
☛
6.5.4 IPU
Black Line Erase942*
Selects the black line erase level. This setting is effective
only when originals are scanned by the A(R)DF.
[0 = No / 1 = Weak / 2 = Strong]
This setting is applied regardless of what mode has been
selected in SP4-921.
☛
6.5.4 IPU
Positive/Negative
1Text
943*
2 Photo
[0 = No / 1 = Yes] DFU
To Next Page
Loading...
