Ricoh M C240FW - Page 153

Troubleshoot a problem 153
Action
Yes
No
Step 2
1 Depending on your operating system, reduce toner darkness from the
Printing Preferences or Print dialog.
Note: You can also change the setting on the printer control panel.
Navigate to:
Settings > Print > Quality > Toner Darkness
2 Print the document.
Is the print too dark?
Go to step 3.
The problem is solved.
Step 3
1 Depending on your operating system, specify the paper type from the
Printing Preferences or Print dialog.
Notes:
• Make sure that the setting matches the paper loaded.
• You can also change the setting on the printer control panel.
Navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type
2 Print the document.
Is the print too dark?
Go to step 4.
The problem is solved.
Step 4
Check if the paper has texture or rough finishes.
Are you printing on textured or rough paper?
Go to step 5.
Go to step 6.
Step 5
1 Replace textured or rough paper with plain paper.
2 Print the document.
Is the print too dark?
Go to step 6.
The problem is solved.