Ricoh M C240FW - Page 37

Set up, install, and configure 37
NetEase Mail (mail.yeah.net)
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the NetEase Mail
home page, click Settings > POP3/SMTP/IMAP, and then enable either IMAP/SMTP service or POP3/SMTP
service.
Setting
Value
Primary SMTP Gateway
smtp.yeah.net
Primary SMTP Gateway Port
465
Use SSL/TLS
Required
Require Trusted Certificate
Disabled
Reply Address
Your e-mail address
SMTP Server Authentication
Login / Plain
Device-Initiated E-mail
Use Device SMTP Credentials
Device UserID
Your e-mail address
Device Password
Authorization password
Note: The authorization password is provided when IMAP/SMTP service or
POP3/SMTP service is enabled.
Outlook Live
These settings apply to outlook.com and hotmail.com e-mail domains.
Setting
Value
Primary SMTP Gateway
smtp.office365.com
Primary SMTP Gateway Port
587
Use SSL/TLS
Required
Require Trusted Certificate
Disabled
Reply Address
Your e-mail address
SMTP Server Authentication
Login / Plain
Device-Initiated E-mail
Use Device SMTP Credentials
Device UserID
Your e-mail address
Device Password
Account password or app password
Notes:
• For accounts with two-step verification disabled, use your account password.
• For accounts with two-step verification enabled, use an app password. To
create an app password, go to the Outlook Live Account Management page,
and then log in to your account.