Ricoh M C240FW - Page 38

Set up, install, and configure 38
QQ Mail
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the QQ Mail
home page, click Settings > Account. From the POP3/IMAP/SMTP/Exchange/CardDAV/CalDAV Service
section, enable either POP3/SMTP service or IMAP/SMTP service.
Setting
Value
Primary SMTP Gateway
smtp.qq.com
Primary SMTP Gateway Port
587
Use SSL/TLS
Required
Require Trusted Certificate
Disabled
Reply Address
Your e-mail address
SMTP Server Authentication
Login / Plain
Device-Initiated E-mail
Use Device SMTP Credentials
Device UserID
Your e-mail address
Device Password
Authorization code
Note: To generate an authorization code, from the QQ Mail home page, click
Settings > Account, and then from the
POP3/IMAP/SMTP/Exchange/CardDAV/CalDAV Service section, click
Generate authorization code.
Sina Mail
Note: Make sure that the POP3/SMTP service is enabled on your account. To enable the service, from the Sina
Mail home page, click Settings > More settings > User-end POP/IMAP/SMTP, and then enable POP3/SMTP
service.
Setting
Value
Primary SMTP Gateway
smtp.sina.com
Primary SMTP Gateway Port
587
Use SSL/TLS
Required
Require Trusted Certificate
Disabled
Reply Address
Your e-mail address
SMTP Server Authentication
Login / Plain
Device-Initiated E-mail
Use Device SMTP Credentials
Device UserID
Your e-mail address