Ricoh M C240FW - Page 39

Set up, install, and configure 39
Setting
Value
Device Password
Authorization code
Note: To create an authorization code, from the e-mail home page, click
Settings > More settings > User-end POP/IMAP/SMTP, and then enable
Authorization code status.
Sohu Mail
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the Sohu Mail
home page, click Options > Settings > POP3/SMTP/IMAP, and then enable either IMAP/SMTP service or
POP3/SMTP service.
Setting
Value
Primary SMTP Gateway
smtp.sohu.com
Primary SMTP Gateway Port
465
Use SSL/TLS
Required
Require Trusted Certificate
Disabled
Reply Address
Your e-mail address
SMTP Server Authentication
Login / Plain
Device-Initiated E-mail
Use Device SMTP Credentials
Device UserID
Your e-mail address
Device Password
Independent password
Note: The independent password is provided when IMAP/SMTP service or
POP3/SMTP service is enabled.