Registering Folders
241
7
Changing the protocol
A Select [SMB] or [FTP] using {U} or {T}, and then press the {OK} key.
A confirmation message appears.
B Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
Reference
p.205 “Registering an SMB folder”
p.219 “Registering an FTP Folder”
Deleting the NCP registered folder
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C Select [Address Book Management] using {U} or {T}, and then press the {OK}
key.
To Next Page
Loading...
