SNMP
101
9
SNMP
The printer is equipped with an SNMP (Simple Network Management Protocol)
agent that operates under UDP and IPX on the Ethernet/wireless LAN interface.
Using the SNMP manager you can get information about the printer.
The default community names are “public” and “admin”. You can get MIB in-
formation using these community names.
Important
❒ If you change the machine’s community name to one different from the de-
fault, use SNMP Setup Tool to change the setting for the computer. For more
information, see SNMP Setup Tool Help.
Note
❒ Before using SNMP Setup Tool, install SmartDeviceMonitor for Admin.
❒ Follow the procedure below to start SNMP Setup Tool:
• Windows 95/98/Me/2000, Windows NT 4.0:
On the [Start] menu, point to [Programs], point to [SmartDeviceMonitor for Ad-
min], and then click [SNMP Setup Tool].
• Windows XP, Windows Server 2003:
On the [Start] menu, point to [All Programs], point to [SmartDeviceMonitor for
Admin], and then click [SNMP Setup Tool].
❖ Supported MIBs
•MIB-II
•PrinterMIB
•HostResourceMIB
• RicohPrivateMIB
To Next Page
Loading...
