Ricoh Priport HQ9000 - Configuring the Network Interface Module

Understanding Displayed Information
107
9
❖ *5 Output Tray: Status
Configuring the Network Interface Module
The network interface module settings can be displayed using the commands
below.
• telnet : Use the “show” command. See p.85 “Network interface module con-
figuration settings information”.
Status Description
Normal ----
Error Other error
Item name Meaning
Common
Mode
Protocol Up/Down “Up” means active; “Down” means inactive.
AppleTalk
TCP/IP
NetWare
SMB
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location Internal version number
Contact
Soft switch Internal version number
AppleTalk
Mode AppleTalk protocol selected
Net Network number
Object Macintosh printer name
Type The type of printer
Zone Name of zone the printer belongs to
TCP/IP
Mode “Up” means active, “Down” means inactive.
ftp
lpr