Using the Printer Function
42
5
Setting Up a Client Computer
This section describes how to set up a client computer when using a NetWare
print server.
Note
❒ Use the version of Novell Client provided with your operating system, or the
latest version.
❒ This section assumes the client computer has NetWare client applications in-
stalled and is correctly configured to communicate with a NetWare print
server. If it is not, install the necessary applications before starting the setting
up procedure.
Windows 95/98/Me
Follow the procedure below to set up a Windows 95/98/Me client computer:
Preparation
Log on to the NetWare file server before starting the following procedure:
A Install the printer driver you want to use as “local printer”.
Reference
For more information about installing the printer driver, see “Installing the
Software”, Printer Reference.
Note
❒ Any port can be selected during installation. However, LPT1 is recom-
mended.
B On the [Start] menu, point to [Settings], and then click [Printers].
C In the [Printers] window, click the icon of the printer you want to use.
D On the [File] menu, click [Properties].
E Click the [Details] tab, and then click [Add Port].
F Click [Network], and then click [Browse].
G In the tree, double-click the name of the file server.
The queues are displayed.
H Select the queue you want to print, and then click [OK].
I Click [OK].
In the [Print to the following port] box, a network path to the printer appears.
J Click [OK] to close the [Printer Properties] dialog box, and then open it again.
To Next Page
Loading...
