Ricoh Priport HQ9000 - Settings You Can Change with User Tools

User Tools Menu (System Settings)
11
3
Settings You Can Change with User Tools
Interface Settings/Network
❖ IP Address
Before using this machine in the network environment, you must configure
the IP address and subnet mask.
•Auto-Obtain (DHCP)
•Specify
When you select [Specify], enter the [IP Address]and [Sub-net Mask] as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
• IP Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000
Note
❒ Default: Auto-Obtain (DHCP)
❒ When you select [Specify], be sure not to set the same [IP Address] as that of
another machines on the network.
❒ The physical address (MAC address) also appears.
❖ Gateway Address
A gateway is a connection or interchange point between two networks. Con-
figure the gateway address for the router or host computer used as a gateway.
• Gateway Address:000.000.000.000
Note
❒ Default: 000.000.000.000
❖ Effective Protocol
Select the protocol to use in the network.
• TCP/IP:Effective/Invalid
• NetWare:Effective/Invalid
• SMB:Effective/Invalid
• AppleTalk:Effective/Invalid
Note
❒ Default: TCP/IP: Effective, NetWare: Effective, SMB: Effective, AppleTalk: Effec-
tive