Printing with NetWare
31
5
Setting Up as a Print Server
NetWare 3.x
A Log on to the file server as a Supervisor, or equivalent.
B Start SmartDeviceMonitor for Admin.
C On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of machines appears.
D In the list, select the printer for which you want to change configuration.
E On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts.
F Click [Wizard], and then click [OK].
G If necessary, enter the print server name in the [Device Name:] box, and then
click [Next >].
H Select the [NetWare] check box, and then click [Next >].
I Click [Bindery mode], enter the file server name in the [File Server Name:] box,
and then click [Next >].
•In the [File Server Name:] box, enter the file server name (up to 47 alphanu-
meric characters) of the server to make the print server. You can also click
[Browse...] to select a file server in the [Browse...] dialog box.
J Enter the print server name in the [Print Server Name:] box, the printer name
in the [Printer Name:] box, and the print queue name in the [Print Queue Name:]
box, and then click [Next >].
•In the [Print Server Name:] box, enter the name of the NetWare print server
using up to 47 characters.
•In the [Printer Name:] box, enter the name of the NetWare printer using up
to 47 characters.
•In the [Print Queue Name:] box, enter the name of the print queue to be added
to NetWare.
K After confirming the settings, click [Next >].
The settings take effect, and NIB Setup Tool closes.
L Quit SmartDeviceMonitor for Admin.
To Next Page
Loading...
