Ricoh Priport HQ9000 - Specifications

Appendix
120
9
Specifications
*1
Use the SmartDeviceMonitor for Client port.
*2
To use IPP under Windows XP or Windows Server 2003, use the Standard IPP port.
Note, in SmartDeviceMonitor for Client however, this port does not support digest
access authentication.
*3
This can be used when the PostScript board is installed.
*4
Under Windows, this function can be used with TCP/IP and NetBEUI.
Interface 100BASE-TX, 10BASE-T, IEEE 802.11b
Frame type EthernetII, IEEE 802.2, IEEE 802.3, SNAP
Protocol • Printer (LAN)
TCP/IP
LPR
RSH
RCP
DIPRINT
FTP
IPP
*1 *2
IPX/SPX (NetWare)
AppleTalk
*3
NetBEUI
SMB
*1 *4
SNMP MIB-II, PrinterMIB, HostResourceMIB, RicohPrivateMIB