Appendix
104
9
Printer Status and Configuration
You can check the printer status and configuration using telnet.
❖ telnet
Use the “info” or “status” command.
Printer status
Status Description
Call Service Center Call service center and ask for help.
Cover Open: Front Cover The machine's front cover is open.
Cover Open: LCT Bridge Cover The machine’s LCT bridge cover is open.
Cover Open: Sorter Covers The machine’s sorter cover is open.
Empty: Ink The ink has run out.
Empty: Master The master has run out. Change the master roll.
Energy Saver Mode The printer is standing by in energy saver mode.
Error: ASIC An ASIC (application-specific integrated cir-
cuit) error has occurred.
Error: DIMM Value A DIMM value error has occurred.
Error: Ethernet Board An Ethernet module error has occurred.
Error: Memory Switch A memory switch data error has occurred.
Error: Optional Font An error has occurred in the optional fonts.
Error: Optional RAM An error has occurred in the optional memory
unit.
Error: Resident Font ROM An error has occurred in the resident font ROM.
Error: USB Interface A USB interface module error has occurred.
Error: Wireless Card No wireless card is inserted.
Error: Wireless Card or Board A wireless card or wireless board error has oc-
curred.
Miscellaneous Error An unspecified error has occurred.
Error HDD Board HDD board error has occured
Mismatch: Paper Size Auto Select cannot find paper in any of the
trays to match the paper size setting.
Mismatch: Paper Size: Feed Tray The paper feed tray is set to the wrong paper
size for the paper it contains.
Mismatch: Paper Size: LCT The LCT tray is set to the wrong paper size for
the paper it contains.
No Paper: Not Detected:LCIT The LCT tray has run out of paper.
No Paper: Not Detected:Feed Tray The paper feed tray has run out of paper.
To Next Page
Loading...
