Ricoh Priport HQ9000 - Configuring the Network Interface Module Settings

Configuring the Network Interface Module Using a Web Image Monitor
60
8
Configuring the Network Interface Module
Settings
A Start the Web Image Monitor.
B In the [Address] box, enter the machine's IP address (for example ht-
tp://XXX.XXX,XXX,XXX, where the Xs are the numbers of the IP address).
The status of the printer you chose appears on the Web Image Monitor.
C Click [Administrator Mode].
The dialog box for entering the password and user name appears.
D Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and enter “password”
for the password.
E In the menu area, select the item, and then make the necessary settings.
F Click [Apply].
The configuration is transmitted.
Reference
For more information about making settings, see p.61 “Using Web Image
Monitor Help”.